M813-OSCILLATOR Control Module


The Module Expansion Bus allows to connect several, additional control modules on the M800- Synthesizer Main Module. This enables a quick overview and real time change of the parameters to the synth-engine. In this case the M813 represents a typical oscillator section in the form of a classic Waveform Oscillator or a Wavetable Oscillator.

It is possible to just use one module to change parameters for different instances of oscillators. To select the specific instance use the “Assign Button”.  In addition, for every instance you are able to use your own module.

The haptical feeling of the precise encoder with a LED ring gives you maximum control even for live setups.
The storing & retrieving of the parameters save your work.



SHAPE:              Value (-50 to 0 to 50 %)


Waveform:      PULSE, pulse width 0 to 100,

                        Waveform: Ramp-DW(-50%),

                        Triangle(0%),

                        Ramp-UP(100%) 

                        for alle other Waveform this parameter don't care.

SHAPE-AMT:  Value  (0-100 %) shape modulation amount


SEMITONE:     Value (-12 to 12 semi) Pitch shift semitone steps


FM-AMT:         Value (0-100 %) Frequency  modulation amount


FINE:               Value (-50 to 50 cent)  Pitch shifrt in cent

 

PHASE:           Value (0-100 %) Phasen position for SIN waveform


LEVEL:            Value (0-100 %) Output Level


                                                        <WAVE>:          Waveform selectiont:  SAW, PULSE, TRI, SIN ,RAND, NOISE




Function on the M800:


Classic Waveform Oscillator OSC1 / 2 or Wavetable Oscillator WTOSC3



This module controls the function of a classic Waveform Oscillator (OSC 1/2) on the M800. The values are reflected in both directions even when you change the parameter on the M800 or on the M813 module.






This module controls the function of a Wavetable Oscillator (WTOSC3) on the M800. The values are reflected in both directions even when you change the parameter on the M800 or on the M813 module.